Close Advertisement


6W DC-DC Converter Accepts Wide DC Input From 12 to 160V

Keywords in this Article:

No Keywords

  • Page 1 of 1
    Bookmark and Share


Gaia Converter has announced the MGDDI-06 Series of DC/DC Converters for applications in airborne and military. Using proprietary design, the product covers input voltage range from 12 to 160V compatible with typical battery/bus voltages (24V, 28V, 36V, 48V, 72V, 96V, 110V, 125V) including transients with close to 90 percent efficiency. There are two isolated outputs (for parallel, serial or symmetrical operation) of 5V, 12V, 15V and 24V available for application such as single 5 to 48V output, +/- 15V or 2 x 24V outputs (3W each).

The units have protection with zero to full load regulation, trim and on/off capability, adjustable UVLO, soft start, embedded EMI filter, over-current and over-temperature. Measured in 0.33H x 1L x 0.75W inches, the unit is rated at 6W and can perform in rugged condition from -40 to +100 degrees C. It is also compliant with Mil-Std-704, 1275, DO-160, EN50155/55022 and does not require optocouplers in the feedback loop.

Gaia Converter
Morristown, NJ
(973) 539.0568